Sound Examiner SE-401
$2,795.00
Description
Includes meter, Class 1 Microphone with Remote Option, 053-321 USB power supply, 053-575 USB cable 059-344 windscreen, 056-990 calibrator adapter and 053-711 storage case.
SE-401 Sound Examiner
The Sound Examiner is engineered to accurately measure noise levels in highly variable environments, including those that require intrinsic safety (-IS models). These meters compute average sound pressure level (LEQ/LAVG) over the run time, helping you to more accurately assess occupational and environmental noise levels. Instruments are available in Class/Type 1 and Class/Type 2 models. The SE-401 and SE-402-R models feature a removable preamp to support remote monitoring. Intrinsically safe models allow for monitoring in hazardous environments. All models are ready to use with no set-up required.
- Choice of Microphones | User can specify microphone type (Class/Type I or Class/Type II) based on application. Select Type II for general duty, Type I for applications requiring higher accuracy.
- Removable Preamp (SE-401 and SE-402-R models) | Preamp can be easily removed to enable interference-free low-level monitoring, especially for remote use.
- Aerodynamic Shape | Minimizes disturbance to sound fields being measured, ensuring accurate readings.
- Onboard Data Logging | Allows user to capture maximum, minimum and peak values at intervals down to 1 second for thorough analysis. Can be used with TSI Quest Detection Management Software to manage compliance with hearing conservation programs.
- Conformance to Standards | Meets IEC 61672-1 (2002) and ANSI S1.43-1997 (R2007) standards and is CE certified. Intrinsic Safety approvals on SE-401-IS and SE-402-IS.
- Detection Management Software | Offers a variety of functionality allowing the ability to intuitively interpret measurements and generate reports for export and sharing of results.
- Occupational noise evaluation including hazardous locations
- Environmental noise assessments
- General acoustic analysis
- Machinery and equipment noise evaluations
| Measurements | ||
| Parameters | SPL, LMax, LMin, LPk (peak), LEQ/LAVG, LE, Elapsed Time |
|
| Peak and Frequency Weighting | A, C, Z | |
| Response Time | Fast and Slow | |
| Ranges | 110 dBA total dynamic measurement range | |
| Overall range | 30 – 140 dBA (single range) | |
| Max Peak Level | 143 dBA (sampled peak) | |
| Exchange Rates | 3, 4, 5 dBA | |
| Status Indicators | Run, Stop, Battery Status, OL (overload), UR (under-range), Run-Time, Locked Status | |
| Physical | ||
| Size | 11.2” (L) x 2.8” (W) x 1.3” (D) / 28.4 cm (L) x 7.1 cm (W) x 3.3 cm (D) (with preamp and microphone) | |
| Weight | SE-401 model | 12.9 oz / 367.5 g (with preamp and microphone) |
| SE-401-IS model | 14.5 oz / 410 g (with preamp and microphone) | |
| Housing | ABS Polycarbonate IP65. (Enclosure rated to IP65. Microphone and external connectors not IP rated.) | |
| Tripod Mount | Standard photographic mount on backside accepts ¼” – 20 screw threads | |
| Drop Protection | Minimum 2 meters onto concrete, 2 times on each face. Acceptable microphone damage. | |
| Environmental | ||
| Operating Temperature | 14 °F to 122 °F (-10 °C to 50 °C ) | |
| Humidity | 0 to 90% RH, non-condensing | |
| Storage Temperature | -4 °F to 140 °F (-20 °C to 60° C) | |
| Atmospheric Pressure | Operating | 80 to 110 kPa |
| Storage | 50 to 150 kPa | |
| Power / Electrical Characteristics | ||
| Battery | Lithium Polymer | 2500 mAHr for standard models / 1500 mAHr for IS models, rechargeable |
| Run-Time | 18 hours minimum (excluding the backlight) for standard models | |
| 8 hours for IS models | ||
| Battery Life | 3 years or 500 cycles (service replaceable) | |
| Battery Charge | USB charger is provided with instrument. | |
| Battery charge time | 8 hours (approx.) | |
| Internal Memory | 2MB (34 days at 1-minute logging) | |
| Communications | USB Interface | |
| Standard Microphones | Class/Type 1 Precision QE4936 microphone | |
| Preamplifier | Preamp directly accepts ½” (13.2 mm) microphone | |
| Remote Cable | Drives up to 50 ft (15 m) of cable with negligible signal loss (not available on IS) | |
| Standards | ||
| Intrinsic Safety (SE-401 IS) | EN60079-11:2012 Part 11, IEC 60079-11 Ed. 6:2012 Part 11 | |
| EN60079-0:2013, IEC 60079-0 Ed. 5:2013 | ||
| IECEx Certificate File #: 13.0006X | ||
| ATEX Directive 2014/34/EU for use in potential explosive atmospheres certificate number: 1210031x | ||
| Ports and Connections | ||
| AC/DC Output | 3.5 mm stereo (tip – AC, center ring – DC, ring – Gnd); not applicable to IS models | |
| I/O Connector | RS-232 (I/O connector not applicable to IS models) | |
| USB | Conforms to USB 2.0, mini-USB connector | |
| Conformance to Standards | ||
| IEC 61672-1 (2002) | Electroacoustics, Sound Level Meters, Part 1: Specifications | |
| ANSI S1.43-1997 (R2007) | American National Standards: Specifications for Integrating Averaging Sound Level Meters | |
| ANSI S1.4-1983 (R2006) | Specifications for Sound Level Meters | |
| CE Mark | Self Certified | |
| Intrinsic Safety Standards (SE-401 IS model) | Contact factory for detailed information | |
| Sound Examiner Sound Level Meters | Sound Examiner SE-401 | Sound Examiner SE-402 | Sound Examiner SE-402-R | Sound Examiner SE-401-IS | Sound Examiner SE-402-IS |
|---|---|---|---|---|---|
| DMS Compatible | + | + | + | + | + |
| Data Logging | + | + | + | + | + |
| External AC/DC output | + | + | + | ||
| Class/Type 2 Accuracy | + | + | + | ||
| Class/Type 1 Accuracy | + | + | |||
| Remote capability with removeable preamp | + | + | |||
| Intrinsic Safety approvals | + | + |
Additional information
| Weight | 1 lbs |
|---|