Description
Also includes AC Adaptor, flash drive, USB cable, & tubing
RKI SDM-2009 Calibration Station
RKI’s new SDM-2009 calibration station for the GX-2009 is now available with advanced features for charging, calibration, & bump testing. Once you power up the GX-2009 inside the SDM-2009 calibration module, the GX-2009’s display will indicate whether it’s transmitting data, bump testing, calibrating, as well as the results of the bump test or calibration.
Multi Module System
The SDM-2009 can also be connected to a PC for automated calibration, bump testing, and archiving of logged data including calibration and bump test records, interval and alarm trends. Network up to 10 SDM-2009 stations to charge, calibrate, and bump test 10 instruments simultaneously.
User Guide Poster
Each SDM-2009 ships with a pictorial wall chart user guide. This guide gives the already easy to use cal station a simple pictorial easy step by step guide to calibrating or bump testing a GX-2009. It’s ideal to hang in an instrument shop or wherever the SDM-2009 is located.
Stand Alone Station
- Stand-alone station (no PC Required)
- Charging
- Calibration
- Bump Test
- Save Bump Test and Calibration records
- Bump test and calibration records copy to USB jump drive
- Includes PC software for viewing/ archiving bump test and calibration records
- Multiple modules connected to a PC (10 max)
- Charging
- Calibration
- Bump Test
- Automatic calibration/bump test option
- Configure GX-2009 parameters
- Archive Bump Test and Calibration records
- Archive data to network location
- Software controlled data retrieval
- Windows 7 compatible
Input Power | 12 VDC |
NOTE: AC Adapter with 100 - 240 VAC, 50/60 Hz, 0.6A input and 12 VDC, 1.2A output provided as standard. | |
Environmental Conditions | • For Indoor Use Only |
• -10° C to 40° C, below 80% Relative Humidity, Non-Condensing | |
Applicable Instruments | GX-2009 |
Memory Capacity | 64 KB |
Maximum Record Size | 256 bytes |
Maximum Number of Records Saved | 200 |
Number of Calibration Gas Cylinders | One calibration gas cylinder per bump test or calibration |
Standard Accessories | • AC Adapter |
• USB Flash Drive | |
• Single Module Data Viewer Program | |
• SDM-GX Docking Station PC Controller Program | |
• Inlet Air Filter | |
• Instruction Manual | |
• 10 Foot Long Exhaust Tube | |
• One 3 Foot Long Tube for GAS Fitting | |
• 10 Foot Long 3/16 Inch Tube for GAS manifolding | |
• 2 T-Fittings | |
• Check Valve | |
• USB Cable, Type A to Type B |