Industrial Scientific Ventis Multi-Gas Detector – LEL, CO, H2S, O2, Li-ion
$950.00
Description
Industrial Scientific Ventis MX4
- Description
- Features
- Specifications
- Documentation
- Confined Space Kits
- Docking Station
- Slide-on Pump
- Calibration Gas
Introducing the Ventis MX4 – a compact, multi-gas monitor available in both aspirated and diffusion versions. The Ventis meets your gas detection needs with ease. It is the ideal instrument for monitoring one to four gases in confined spaces and nearly any other potentially hazardous environment. This lightweight instrument is available with a bright "safety orange" overmold providing visibility in darker environments. An extended range lithium-ion battery pack provides up to 20 hours of continuous monitoring when using the diffusion version. Compatible with iNet and our DSX™ Docking Station.
- Gain increased instrument visibility with a tough, "safety orange" overmold
- Realize true portability with multi-gas protection in single-gas size
- Use the extended range battery for up to 20 hours (without pump)
- iNet® and DSX™ Docking Station compatible
| WARRANTY | The following components are warranted for four (4) years from the device’s date of manufacture: monitor, pump, and CO/H2S/O2/LEL sensors. All other components are warranted for two (2) years from the device’s date of manufacture. | |
| CASE MATERIAL | Polycarbonate with protective rubber overmold | |
| DIMENSIONS | 4.1 x 2.3 x 1.2 in (103 x 58 x 30 mm) without pump, lithium-ion battery version | |
| 6.8 x 2.6 x 2.6 in (172 x 67 x 66 mm) with pump, lithium-ion battery version | ||
| WEIGHT | 6.4 oz (182 g) without Pump, lithium-ion battery version | |
| 13.4 oz (380 g) with Pump, lithium-ion battery version | ||
| POWER SOURCE/RUN TIME | Rechargeable slim extended lithium-ion battery | (18 hours typical @ 20 ºC) without Pump |
| Rechargeable lithium-ion battery | (12 hours typical @ 20 ºC) without Pump | |
| Rechargeable extended-range lithium-ion battery | (20 hours typical @ 20 ºC) without Pump | |
| (12 hours typical @ 20 ºC) with Pump | ||
| Replaceable AAA alkaline battery | (8 hours typical @ 20 ºC) without Pump | |
| (4 hours typical @ 20 ºC) with Pump | ||
| ALARMS | Ultra-bright LEDs, loud audible alarm (95 dB at 30 cm) and vibrating alarm | |
| DISPLAY/READOUT | Backlit liquid crystal display (LCD) | |
| TEMPERATURE RANGE | -4 °F to 122 °F (-20 °C to 50 °C) | |
| HUMIDITY RANGE | 15% to 95% Non-condensing (continuous) | |
| SENSORS | Combustible gases/methane – Catalytic Bead | |
| O2, CO, CO/H2 low, H2S, NO2, SO2 – Electrochemical | ||
| MEASURING RANGES | Combustible Gases: | 0-100% LEL in 1% increments |
| Methane (CH4): | 0-5% of vol in 0.01% increments | |
| Oxygen (O2): | 0-30% of vol in 0.1% increments | |
| Carbon Monoxide (CO/H2low): | 0-1,000 ppm in 1 ppm increments | |
| Carbon Monoxide (CO): | 0-1,000 ppm in 1 ppm increments | |
| Hydrogen Sulfide (H2S): | 0-500 ppm in 0.1 ppm increments | |
| Nitrogen Dioxide (NO2): | 0-150 ppm in 0.1 ppm increments | |
| Sulfur Dioxide (SO2): | 0-150 ppm in 0.1 ppm increments | |
| CERTIFICATIONS | INGRESS PROTECTION IP66/67 | |
| ANZEx: | Ex ia s Zone 0 I/IIC T4 | |
| ATEX: | Ex ia IIC T4 Ga and Ex ia I Ma; Equipment Group and Category II 1G/I M1 | |
| China CMC: | Metrology approval | |
| China CPC: | CPA 2017-C103 | |
| China Ex: | Ex ia IIC T4 Ga; Ex ia d I Mb | |
| China KA: | Approved for Underground Mines with CO, H2S, O2 and CH4 | |
| China MA: | Approved for Underground Mines with CO, H2S, O2 and CH4(Note: Diffusion 17144453 pack only) | |
| CSA: | Cl I, Div 1, G A-D, T4; Ex d ia IIC T4 | |
| EAC: | PB Ex d ia I X/1Ex d ia IIC T4 X | |
| IECEx: | Ex ia IIC T4 Ga | |
| INMETRO: | Ex ia IIC T4 Ga | |
| KC: | Ex d ia IIC T4 | |
| KIMM: | Ex d ia IIC T4 | |
| MED: | Portable Multi-Gas Detector; Category 2 (MED 96/98/EC; MED 2012/32/EU Marine Directive) Li-ion | |
| MSHA: | 30 CFR Part 22; Permissible for underground mines; Li-ion | |
| PA-DEP: | BFE 46-12 Permissible for PA Bituminous Underground Mines; Charger/docking station accessories; Category 1 | |
| SANS: | SANS 1515-1; Type A; Ex ia I/IIC T4; Li-ion | |
| TIIS: | Ex ia IIC T4 X | |
| UL: | Cl I, Div 1, Groups A-D, T4; Zone 0, AEx ia IIC T4; Cl II, Gr F-G (Carbonaceous and Grain dust) | |
| SUPPLIED WITH MONITOR | Calibration Cup (without pump), Sample Tubing (with pump), Reference Guide | |
| LANGUAGE | English (1), French (2), Spanish (3), German (4), Italian (5), Dutch (6), Portuguese (7), Russian (9), Polish (A), Czech (B), Chinese (C), Danish (D), Norwegian (E), Finnish (F), Swedish (G), Japanese (J) |
Ventis MX4 Brochure
Ventis MX4 Specifications Sheet
Ventis MX4 Product Manual
Ventis MX4 Ordering Guide
Ventis Comparison Chart
Ventis MX4 Specifications Sheet
Ventis MX4 Product Manual
Ventis MX4 Ordering Guide
Ventis Comparison Chart
Additional information
| Weight | 1 lbs |
|---|---|
| Dimensions | 4.1 × 2.3 × 1.4 in |