| Transmitter Dimensions |
| Size (unit with Cartridge) | 136 mm (H) x 83 mm (W) x 152 mm (D) (5.35 in x 3.27in x 5.98 in) |
| Weight - Transmitter | 1.3 kg (2.87 lb) |
| Weight - Cartridge | 0.17 kg ~ 0.22 kg (0.38 lb ~ 0.49 lb) dependent on sensor type |
| Optional Relay Direction |
| Size | 137 mm (H) x 84 mm (W) x 41 mm (D) (5.39 in x 3.31 in x 1.61 in) |
| Weight | 0.31 kg (0.68 lb) |
| Power Requirements |
| Operating Voltage | 24 VDC Nominal, -15 to 10% (20.4 VDC to 26.4 VDC) |
| Operating Voltage with Power Over Ethernet (PoE) | 48 VDC PoE (IEEE 802.3af compliant) |
| Power Consumption |
| Transmitter unit (normal condition) | Typ. 5 W |
| Transmitter unit (full load condition) | ≤ 11.45 W |
| Transmitter with Optional Relay | ≤ 12.9 W |
| Outputs |
| Visual | Alarm, Power, Fault LEDs, and LCD with all the gas readings and events |
| LEDs: Power (Green), Alarm 1 (Red), Alarm 2 (Red), Fault (Yellow) |
| Relays in Transmitter | (3) Relays for Alarm 1, Alarm 2 and Fault rated 1.0 A @ 30 Vdc or 0.5 A @ 125 Vac |
| Max 10 uA @ 10 mV minimum, configurable as normally open or closed, latched or unlatched |
| Relays in Optional Relay | 8 relays for Alarm 1 and Alarm 2 of each channel and a relay for common fault rated 1.0 A @ 30 Vdc or 0.5 A @ 125 Vac |
| Max 10 uA @ 10 mV minimum, configurable as normally open or closed, latched or unlatched |
| Analog | 3 wire sink, 3 wire source, or 4 wire fully isolated; 0 mA to 21 mA for each channel |
| Digital Communications | Modbus/TCP Ethernet/Power over Ethernet (PoE) |
| Certifications and Specifications |
| CE marked Meets EN 50270:2015+AC:2016 and EN 61000-6-4:2007+A1 ETL approved UL 61010-1:2012 Ed.3 IEEE 802.3af-2003 |
| Performance |
| Refer to individual sensor datasheets |
| Transport System |
| Flow Rate | 600 mL/min |
| Transport Time | 2 seconds to 25 seconds maximum |
| Sample Line Tubing | 3.18 mm ID x 6.35 mm OD (0.125 in x 0.25 in) |
| Tubing Length | Up to 30 m (100 ft) with FEP tubing |
| Exhaust Line Tubing | 4.76 mm ID x 6.35 mm OD (0.188 in x 0.25 in) |
| Exhaust Length | Up to 30 m (100 ft) |
| Ambient Port | In line air filter required |
| Operating Temperature |
| 0°C to 40°C (32°F to 104°F) |
| Wiring Requirement |
| 4-20 mA | 2 wire, 14 AWG maximum |
| Digital | CAT5 Cable or equivalent: RJ45 connector |
| Gas Concentration Display and Interface |
| Instrument | 4-digit alphanumeric display with separate units, concentration bar graph for each channel and other icon driven indicators |
| 4 button interface keypad |
| Remote | Internet browser access via Ethernet |
| Installation Details |
| Mounting | Wall mounted using pre-drilled holes on chassis. Options for DIN rail |
| Material | Cover: Plastic (Polycarbonate) |
| Chassis/Mounting bracket: Zinc plated steel |
| Red frame: Liquid coated aluminum |
| Warranty |
| Transmitter Unit | 1 year |
| Sensor Cartridge | 2 years |
