Honeywell Midas-M Sulfur Dioxide (SO2) Sensor, 0-8 ppm, 2 years
$483.00
Description
Honeywell Midas-M Sulfur Dioxide (SO2) Sensor, 0-8 ppm, 2 years
The Midas-M Sensor Cartridge enables the detection of a wide range of asphyxiant, toxic, flammable, pyrophoric, corrosive, and oxidizer gases. The plug & play Sensor Cartridge is located inside the detector’s chassis.
Note: The SO2 sensor CANNOT be combined with an O3 sensor in a complete Midas-M Sensor Cartridge Package.
| Gas Measured | Sulfur Dioxide | |
|---|---|---|
| Cartridge Part Number | MMS-S2 | |
| Sensor Technology | 3 electrode electrochemical cell | |
| Measuring Range | SO2 | 0 ppm to 8 ppm |
| Default Alarm 1 | 1 ppm (rising) | |
| Default Alarm 2 | 2 ppm (rising) | |
| Accuracy | <±5% of measured value | |
| Exposure to SO2 4 ppm for 5 minutes | ||
| Response Time (t62.5) | Typical 7 seconds | |
| Sensor Cartridge Life Expectancy | 24 months under typical application conditions | |
| Operating Temperature | 0ºC to 40ºC (32ºF to 104ºF) | |
| Effect of Temperature | Zero | < ± 0.01 ppm/ºC |
| Sensitivity | < ± 0.4% of measured value/ºC | |
| Operating Humidity (continuous) | 15% RH to 90% RH | |
| Effect of Humidity | Zero | No effect |
| Sensitivity | < ± 0.5% of measured value/% RH | |
| Operating Pressure | 90 kPa to 110 kPa | |
| Effect of Position | No effect in typical application | |
| Long Term Drift | Zero | TBA |
| Sensitivity | <10% of measured value/year | |
| Calibration Gas | Sulfur Dioxide (2 ppm to 6 ppm, default 4 ppm) | |
| Challenge Gas (Bump Test) | Sulfur Dioxide (4 ppm) | |
| Warm Up Time | < 10 minutes | |
| Storage Temperature | 5°C to 25°C (41°F to 77°F) | |
Each Midas-M sensor is potentially cross sensitive to other gases and this may cause a gas reading when exposed to other gases than those originally designated. The table below presents typical readings that will be observed when a new sensor cartridge is exposed to the cross sensitive gas (or a mixture of gases containing the cross sensitive species).
| Gas / Vapor | Chemical Formula | Concentration applied (ppm) | Reading (ppm SO2) |
|---|---|---|---|
| Acetylene | C2H2 | 10 | <30 |
| Ammonia | NH3 | 20 | 0 |
| Carbon Monoxide | CO | 300 | <1 |
| Chlorine | CI2 | 5 | <-2 |
| Ethene | C2H4 | 50 | <45 |
| Hydrogen | H2 | 400 | <1 |
| Hydrogen Cyanide | HCN | 10 | <5 |
| Hydrogen Sulfide | H2S | 25 | <0.1 |
| Iso Propanol | C3H7OH | 3500 | 1.65 |
| Nitric Oxide | NO | 50 | 0 - 5 |
| Nitrogen Dioxide | NO2 | 6 | <-10 |
| Phosphine | PH3 | 0.6 | 1.5 |
| Silane | SiH4 | 10 | 8 (Overrange) |
Additional information
| Weight | 1 lbs |
|---|