Description
301-EM
- Description
- Features
- Applications
- Specifications
- Documentation
- Accessories
- Replacement Sensors
- S301-IRF
Easily configured to meet ASHRAE 15, B-52 and International Mechanical Code requirements, the Honeywell 301EM is commonly used to optimize gas detection in mechanical and chiller rooms.
A full complement of sensors (including toxic, Oxygen, combustible gases and a full line of refrigerant sensors), horns, strobes and remote panels provide added flexibility to suit a variety of gas detection system solutions.
A full complement of sensors (including toxic, Oxygen, combustible gases and a full line of refrigerant sensors), horns, strobes and remote panels provide added flexibility to suit a variety of gas detection system solutions.
- ASHRAE No 15-2001 Mechanical Standard and B-52 Code Compliance The ASHRAE and B-52 security standards have been established to minimise risk and protect the safety of mechanical room personnel and the environment at large. Available in a special configuration, the 301EM mechanical room controller has been carefully designed to meet and even exceed these rigorous standards. The Vulcain 301EM can be configured to offer automatic fan, horn and strobe activation in addition to manual fan activation. Latching relay for manual alarm recognition, silence key for manual horn deactivation, built-in 24 Vdc outputs for horn operation, and 2 breakglass switch accessories for manual alarm activation ensure optimal performance.
- Easy to read LCD display
- Auto-diagnostic capabilities
- Cost-effective answer for installation in hazardous locations
- Able to operate with up to twenty remote sensors at a time
- Various sensors available to simultaneously detect a range of different gases
- Robust and reliable RS-485 Modbus communication
- Three 24 Vdc alarm outputs and four 4-20 mA outputs
- Four fully programmable relays
- Three alarm levels with built-in visual indicators and audible alarm
- Convenient stand-alone or network operation
- Mechanical Rooms
- Chiller Rooms
Use | Wall mounted mechanical room controller for use with Honeywell Analytics 301IRFS and S301D2 gas sensors for up to 20 points of detection. Four (4) onboard relays can be used to activate alarms or deactivate equipment. | |
Power Requirement | 22-27 VAC, 29-38 VDC, 2A max @ 29VDC | |
Size | 11 (H) x 8 (W) x 2.7 (D) in. (28 x 20.3 x 7 cm) | |
Weight | 2.25 lbs. (1.02 kg) | |
Distance Between Controller and Sensor | 301IRFS refrigerant sensors | Up to 200 ft. (60.9 m) |
S301D2 toxic/combustible sensors | Up to 500 ft. (160 m) | |
Visual Indicators | Normal Operation | Green LED |
Alarm Level 1 | Red LED | |
Alarm Level 2 | Red LED | |
Alarm Level 3 | Red LED | |
Signal Tx | Blinking amber LED | |
Failure Indication | Yellow LED | |
Alarm Levels | 3 with high and low setpoints | |
Outputs | 4 DPDT relays (alarms and/or fault), buzzer | |
Three 24 VDC, 250mA (per output) | ||
Four 4-20mA outputs | ||
Modbus | ||
RFS option | 24 VDC built-in red strobe | |
RFSA option | 24 VDC built-in red strobe & 105 dBA horn | |
Relay Output Rating | 5 A, 30 Vdc or 250 VAC (resistive load) | |
Ratings and Certification | Alarm Levels | CAN/CSA C22.2 No. 61010-1 |
116662 | ||
Conforms to | ANSI/UL 61010-1 |
Gases Detected | Detection Range | Operating Temperature | Operating Humidity Range | |
---|---|---|---|---|
S301-IRF | R11, R22, R123, R125, R134A, R404A, R407C, R410A, R507A | 0-1,000 ppm | 32° to 104°F (0° to 40 °C) | 0-95% non-condensing |
S301-D2 | Carbon Monoxide (CO) | 0-250 ppm | -40° to 100°F (-40° to 40°C) | 0-95% non-condensing |
Chlorine (Cl2) | 0-15 ppm | -40° to 100°F (-40° to 40°C) | 0-95% non-condensing | |
Nitrogen Dioxide (NO2) | 0-10 ppm | -40° to 100°F (-40° to 40°C) | 0-95% non-condensing | |
Hydrogen Sulfide (H2S) | 0-50 ppm | -40° to 100°F (-40° to 40°C) | 0-95% non-condensing | |
Sulfur Dioxide (SO2) | 0-10 ppm | -40° to 100°F (-40° to 40°C) | 0-95% non-condensing | |
Oxygen (O2) | 0-25% | -4° to 104°F (-20° to 40°C) | 0-95% non-condensing | |
Combustibles | 0-100% LEL | -40° to 112°F (-40° to 50°C) | 0-95% non-condensing |
Honeywell’s S301-IRF, together with the 301EM mechanical room controller, provides a complete solution for “at the source” gas detection in a chiller room. The 301EM can be configured to offer automatic fan, horn and strobe activation in addition to manual fan activation when the S301-IRF detects a refrigerant.