Use the Touchpoint Pro Part Number and Pricing Configurator design to build flexible 19’’ Rack Control Systems.
| 19’’ 5U Rack Controller Enclosure |
| Part Number | TPPR-V-0602 |
| Material | Mild Steel |
| Earthing Points | M8 (main grounding); other M6 |
| Dimensions (H x W x D) | 19 in x 8.74 in x 4.33 in (483 mm x 222 mm x 110 mm) |
| Weight | 22 lbs (10 kg) |
| 19’’ 5U Rack Remote Unit Enclosure |
| Part Number | TPPR-V-0612 |
| Material | Mild Steel |
| Earthing Points | M8 (main grounding); other M6 |
| Dimensions (H x W x D) | 19 in. x 8.74 in. x 4.33 in. (483 mm x 222 mm x 110 mm) |
| Weight | 19.84 lbs (9 kg) |
Ring Coupling Module
| Ring Coupling Module |
| Communication / Power Rail |
| Description | 5, 7, 9 or 10-way Communication / Power Rail consists of 1 DIN Rail, 1 Ring Coupling Module (RCM), and a 5, 7, 9 or 10-way Backplane |
| DIN Rail |
| Total Width | 16.93 in. (430 mm) |
| Type | TS-35/15 |
| Ring Coupling Module (RCM) |
| Description | Module for connection of DIN Rail mounted I/O modules to Ring Network |
| Electrical Connection | 2 x Ring Network TX / RX Driver Pairs (Each 2-Wire plus Drain) |
| Supply Voltage | 24 Vdc (18-32 Vdc) |
| Power Consumption | Maximum 1 W |
| Power Dissipation | Maximum 1 W |
| Ring Network Cable | Minimum 2 x 2 x 1 mm2 twisted pair, plus Drain and Overall Screen |
| Operating Temperature | -40°C to +65°C |
| Storage Temperature | -40°C to +65°C |
| Environmental Protection Class | Pollution Degree 2 (indoor sheltered) |
| Connector Coding | Ring cable connectors (TB1-TB4) are coded with coding keys to avoid mis-wiring. |
| DIN Rail connector (Module Supply and Communication) | Maximum Current: 60 mA (18-32 Vdc) |
| Backplane |
| Description | 5, 7, 9 and 10 I/O slot (excluding first slot reserved for RCM) backplane PCB for providing power and Ring Network connections to the RCM and I/O modules |
| Electrical Connection | 2-wire (+V and –V) at Power Supply Input for 5, 7, 9 I/O Slot Backplane |
| 2 x 2-wire (+V and –V) at Power Supply Input for 10 I/O Slot Backplane |
| 10-pin backplane connector for connection to RCM and I/O Modules |
| Maximum Wire Size | 6 mm2 |
| Supply Voltage | 24 Vdc (18-32 Vdc) |
| Backplane current Rating | Maximum 20 A |
| Power Supply Connector Rating | Maximum 32 V, 41 A |
| Backplane connector | Maximum 32 V, 4.04 A |
| Environmental Protection Class | Pollution Degree 2 (indoor sheltered) |
| Operating Temperature | -40°C to +65°C |
| Storage Temperature | -40°C to +65°C |
Touchpoint Pro Communication/Power Rail Terminal Identification
| Terminal Identification | Label | Channel |
| 1 | + | Ring A In |
| 2 | Drain |
| 3 | - |
| 4 | + | Ring B Out |
| 5 | Drain |
| 6 | - |
| 7 | + | Ring B in |
| 8 | Drain |
| 9 | - |
| 10 | + | Ring A Out |
| 11 | Drain |
| 12 | - |
Touchpoint Pro Power Supply Units
| Power Supply Units |
| Power Supply | 120 W (5A) | 240 W (10A) | 480 W (20A) |
| Input Voltage Range | 85 - 264 Vac; 88 – 360 Vdc |
| Input Frequency Range | 50 - 60 Hz ±6% |
| Input AC current | 1.10 A at 120 Vac | 2.22 A at 120 Vac | 4.56 A at 120 Vac |
| 0.62 A at 230 Vac | 1.22 A at 230 Vac | 2.48 A at 230 Vac |
| Output Voltage | 24 Vdc (Adjustable 24 - 28 Vdc) |
| DC OK Relay contact ratings (max.) | 60 Vdc 0.3 A / 30 Vdc 1 A / 30 Vac 0.5 A resistive load |
| Protection | Short Circuit, Overload (current limiting), No load, Over Voltage, Over Temperature |
| Dimensions (W x H x D) | 1.57 in. x 4.88 in. x 4.61 in. (40 mm x 124 mm x 117 mm) | 2.36 in. x 4.88 in. x 4.61 in. (60 mm x 124 mm x 117 mm) | 3.23 in. x 4.88 in. x 5 in. (82 mm x 124 mm x 127 mm) |
| Operating Temperature | -25 °C to +70 °C (-13 °F to 158 °F) |
| Derating (60 °C to 70 °C) | 3 W/°C | 6 W/°C | 12 W/°C |
| Storage Conditions | -40 to +85 °C (-40 °F to 185 °F), 5% to 95% RH |
| Operating Humidity | 5% to 95% RH (non-condensing) |
Touchpoint Pro 120 W 24 Vdc Power Supply Unit
| Label | Purpose |
| N | AC Supply Neutral |
| L | AC Supply Live |
| Earth |
| + | DC Output +V |
| + | DC Output +V |
| - | DC Output -V |
| - | DC Output -V |
| DC OK | Relay Contact |
| DC OK | Relay Contact |
Touchpoint Pro 240 & 480 W 24 Vdc Power Supply Unit
| Label | Purpose |
| N | AC Supply Neutral |
| L | AC Supply Live |
| Earth |
| + | DC Output +V |
| + | DC Output +V |
| - | DC Output -V |
| - | DC Output -V |
| DC OK | Relay Contact |
| DC OK | Relay Contact |
Touchpoint Pro Uninterruptible Power Supply Module (UPS)
| Uninterruptible Power Supply Module (UPS) |
| Description | 23.3 Vdc - 30 Vdc |
| Input Current | 70 mA typical internal current consumption |
| Current consumption for battery charging in constant current mode at 24V input |
| 1.7 A typical at battery selector position <10Ah |
| 3.4 A typical at battery selector position >10Ah |
| Output Voltage | 24 Vdc (nominal) in Normal Operation |
| Adjustable in Battery Operation |
| Output Current | max. 25 A in Normal Operations |
| min. 20 A in Battery Operation |
| Allowed Batteries | 2 x 12 V |
| 3.9 Ah – 130 Ah |
| VRLA lead acid type |
| Dimensions (W x H x D) | 1.81 in. x 4.88 in. x 5 in. (46 mm x 124 mm x 127 mm) |
| Operating Temperature | -40°C to +70°C |
| Derating 60°C to 70°C | 0.5 A/ºC |
| Storage Conditions | -40°C to +85°C, 5% to 95% RH |
| Operating Humidity | 5% to 95% RH (non-condensing) |
Touchpoint Pro Backup Battery
| Backup Battery |
| Description | 24 V sealed lead acid battery, 12 Ah or 27 Ah options |
| Electrical Connection | 2 x 12 Vdc batteries in series |
| Dimensions (W x H x D) | 15.6 in. x 11.8 in. x 8.5 in. (395 mm x 300 mm x 215 mm) |
| Weight | 12 Ah version: 34.6 lbs (15.7 kg) |
| 27 Ah version: 55.1 lbs (25 kg) |
| Operating Temperature | -20°C to +45°C |
| Operating Humidity | 10% to 90% RH non condensing |
| Storage Conditions | -20°C to +40°C, 10% to 90% RH |
| Storage Lifetime without re-charge | 18 months at <5°C, 6 months at 25°C, 3 months at 30°C, 2 months at 40°C |
| Ingress Protection | IP20, NEMA Code 1 |
| Input Voltage (charging) | 25 Vdc to 28 Vdc (UPS Supervised) |
| Output Voltage (when supplying) | 20 Vdc to 28 Vdc (dependent on charge level) |
| Maximum Input Current | 3 A |
| Maximum Output Current | 20 A |
| Environmental Protection Class | Pollution Degree 2 (indoor sheltered) |
| Battery Type | FIAMM 12 V 12 Ah FG21202 or FIAMM 12 V 27 Ah FG22703 |
| Fuse Type (inline) | Bussman 20 A Fast Acting 1.25” Type ABC-20-R |
| Current Limit Protection | Double pole circuit breaker / Isolator, 20 A |
| Maximum Altitude | 2000 m |
Touchpoint Pro UPS Connections
| The UPS connections are as follows: |
| Terminal Identification | Label | Purpose |
| Input DC 24 V | + | DC Supply +V |
| - | DC Supply -V |
| - | DC Supply -V (spare) |
| Output DC 24 V 20 A | + | +V Supply to Touchpoint Pro system |
| - | -V Supply to Touchpoint Pro system |
| Battery | + | Battery + |
| - | Battery - |
Touchpoint Pro UPS Status Relays
| The UPS is equipped with status relays as follows: |
| Terminal Identification | Label | Purpose |
| 1 | Ready | Contact is closed when both batteries are charged, all OK |
| 2 |
| 3 | Buffering | Contact is closed when UPS has switched to battery power |
| 4 |
| 5 | Replace Battery | Contact is closed when a battery quality fault is detected |
| 6 |
| 7 | Inhibit | DO NOT USE |
| 8 |
Touchpoint Pro Analog Input Module mA
| Analog Input Module mA |
| Description | 4-channel 4-20 mA Analog Input Module with 2 or 3 wire interface to detector |
| Sensor Configuration | 4 x 2-wire or 3-wire (current sourced from detector) |
| Signal Measurement Range | 0-25 mA |
| Supply Voltage (Vs) | 24 Vdc (18-32 Vdc) |
| Field Device Supply Voltage | Supply Voltage (Vs) – 0.7 V |
| Single Channel Field Device Supply Current | Maximum 1 A |
| Total Field Device Supply Current | Total Maximum current: | 2 A at 65°C ambient |
| Total Maximum current: | 4 A at 55°C ambient |
| Power Consumption | 0.8 W (Excluding sensor supply) |
| Power Dissipation | Maximum 3.7 W, at 4 A total field device load |
| Maximum 2.1 W, at 2 A total field device load |
| Sense Resistance | 101 Ω |
| Connector Coding | Analog Input Module connectors (TB1-TB4) are coded with coding keys to avoid mis-wiring |
| DIN Rail connector (Module Supply and Communication) | Maximum Current: | 4.04 A (18-32 Vdc) |
Touchpoint Pro Analog Input Module mA Terminal Identification
| Terminal Identification | Label | Channel | Field Device |
| 1 | +V | Input 1 | +24 Vdc |
| 2 | SIG | 4-20 mA signal |
| 3 | -V | 0 Vdc |
| 4 | +V | Input 2 | +24 Vdc |
| 5 | SIG | 4-20 mA signal |
| 6 | -V | 0 Vdc |
| 7 | +V | Input 3 | +24 Vdc |
| 8 | SIG | 4-20 mA signal |
| 9 | -V | 0 Vdc |
| 10 | +V | Input 4 | +24 Vdc |
| 11 | SIG | 4-20 mA signal |
| 12 | -V | 0 Vdc |
Touchpoint Pro Analog Input Module mV
| Analog Input Module mV |
| Description | 4-channel Analog Input Module for Catalytic Bridge sensors |
| Electrical Connection | 4 x 3-wire mV-Bridge |
| Supply Voltage | 24 Vdc (18-32 Vdc) |
| Sensor Drive method | Constant current |
| Programmable Current Range | 180-360 mA |
| Maximum Loop Resistance | Total Maximum loop resistance: | 40 Ω at 200 mA (including Sensor) |
| Total Maximum loop resistance: | 27 Ω at 360 mA (including Sensor) |
| Input Range | ±15 mV to ±600 mV |
| Power Consumption | Maximum 1.2 W (Excluding Sensors) |
| Power Dissipation | Maximum 3.5 W |
| Connector Coding | Analog Input Module connectors (TB1-TB4) are coded with coding keys to avoid mis-wiring |
| DIN Rail connector (Module Supply and Communication) | Maximum Current: | 1.1 A (18-32 Vdc) |
Touchpoint Pro Analog Input Module mV Terminal Identification
| Terminal Identification | Label | Channel | Field Device |
| 1 | S | Input 1 | Sensitive (+) |
| 2 | 01 | Signal |
| 3 | NS | Non-sensitive (-) |
| 4 | S | Input 2 | Sensitive (+) |
| 5 | 01 | Signal |
| 6 | NS | Non-sensitive (-) |
| 7 | S | Input 3 | Sensitive (+) |
| 8 | 01 | Signal |
| 9 | NS | Non-sensitive (-) |
| 10 | S | Input 4 | Sensitive (+) |
| 11 | 01 | Signal |
| 12 | NS | Non-sensitive (-) |
Touchpoint Pro Digital Input Module
| Digital Input Module |
| Description | 4-Channel Digital Input Module for switched input devices |
| Electrical Connection | 4 x 2-wire Switch Inputs |
| Supply Voltage | 24 Vdc (18-32 Vdc) |
| Power Consumption | 1 W maximum (no inputs connected) |
| Power Dissipation | 2.8 W maximum |
| Field Terminals (TB1-TB4) Ratings | Maximum current of 14 mA through switched input device at 18-32 Vdc |
| EOL (End Of Line) Resistance | 10 kΩ, 0.25 W, ±1% |
| INL (In-Line) Resistance | 2.7 kΩ, 0.25 W, ±1% |
Switch Input Device supply
Voltage (Vs) | Minimum | 15 V |
| Maximum | 32 V |
Switch Input Device supply
Current (Is) | Minimum | 5 mA for Supervised OC/SC Switch ON condition |
| Maximum | 14 mA for Unsupervised Switch ON condition |
| Connector Coding | Digital Input Module connectors (TB1-TB4) are coded with coding keys to avoid mis-wiring |
| DIN Rail connector (Module Supply and Communication) | Maximum Current: | 95 mA (18-32 Vdc) |
Touchpoint Pro Digital Input Module Terminal Identification
| Terminal Identification | Label | Channel |
| 1 | + | Input 1 |
| 2 | |
| 3 | - |
| 4 | + | Input 2 |
| 5 | |
| 6 | - |
| 7 | + | Input 3 |
| 8 | |
| 9 | - |
| 10 | + | Input 4 |
| 11 | |
| 12 | - |
Touchpoint Pro Relay Output Module
| Relay Output Module |
| Description | 4-channel Relay Output Module incorporating 4 single pole change over (SPCO) relays and 24 Vdc Auxiliary Power Output |
| Electrical Connection | 4 x SPCO Relay Terminals (TB1 to TB4) |
| 4 x 2-wire Auxiliary Output Terminals (TB5 to TB8) |
| Supply Voltage (Vs) | 24 Vdc (18-32 Vdc) |
| Auxiliary Supply Voltage | Supply Voltage (Vs) – 0.7 V |
| Auxiliary Supply Current | Maximum 1.5 A |
| Power Consumption | Maximum 1.5 W (excluding auxiliary power consumption) |
| Power Dissipation | Maximum 2.3 W |
| Relay Contacts (TB1-TB4) | Maximum 5 A through one relay contact at 250 Vac / 30 Vdc (non-inductive) |
| Maximum 8 A total through all four relay contacts at 250 Vac / 30 Vdc (non-inductive) |
| Minimum 12 Vdc, 10 mA |
| Connector Coding | Relay output connectors (TB1-TB4) and auxiliary output connectors (TB5-TB8) are coded with coding keys to avoid mis-wiring. |
| The relay output connectors (TB1-TB4) are colored black to identify them for AC supply wiring |
| DIN Rail connector (Module Supply and Communication) | Maximum Current: | 1.62 A (18-32 Vdc) |
Touchpoint Pro Relay Output Module Terminal Identification
| Terminal Identification | Label | Channel |
| 1 | NO | Relay 1 |
| 2 | NC |
| 3 | C |
| 4 | NO | Relay 2 |
| 5 | NC |
| 6 | C |
| 7 | NO | Relay 3 |
| 8 | NC |
| 9 | C |
| 10 | NO | Relay 4 |
| 11 | NC |
| 12 | C |
| 13 | | V Aux 1 |
| 14 | +V |
| 15 | -V |
| 16 | | V Aux 2 |
| 17 | +V |
| 18 | -V |
| 19 | | V Aux 3 |
| 20 | +V |
| 21 | -V |
| 22 | | V Aux 4 |
| 23 | +V |
| 24 | -V |
