GX-2009
- Description
- Parts
- Features
- Applications
- Specifications
- Documentation
- Video
- Accessories
- Replacement Sensors
- Calibration Kits
- Calibration Stations
The GX-2009 is the smallest and lightest 4-gas portable multi gas detector in the world. Weighing only 4.6 ounces, it fits in the palm of your hand (2.75” H x 2.95” L x .98” D). The GX-2009 simultaneously monitors and displays combustibles, oxygen, carbon monoxide, and hydrogen sulfide. The GX-2009 represents the latest evolution of gas detection technology. Advancements include dual audible alarm ports and alarm LED’s on 3 sides of the instrument, so that alarm conditions are obvious from multiple perspectives especially in high noise environments. Other features include a water resistant and dust-proof design with IP 67 rating, an impact resistant rubber over-mold body that is RFI resistant, and a large capacity data logging system included as standard. Other standard features are vibration alarm, auto-calibration, calibration and bump test lock out or reminder control, STEL / TWA readings, peak hold, auto backlighting at alarm on a large LCD display, and it even tells the time! All of these controls and features are operated through 2 simple glove friendly buttons.
- Simultaneous detection of 4 gases
- LEL, O2, H2S & CO
- Smallest / Lightest 4 gas monitor on the market
- 2.7” H x 3” W x 1” D
- 4.6 oz.
- Dual audible alarm ports (95 db @ 30 cm)
- 3 visual alarm LED’s
- Vibration alarm
- IP-67 water-resistant/dustproof design
- Calibration and bump test lock out or reminder controls
- Large capacity data logging standard
- 8 alarm trends
- Log time range of 10 to 300 hours
- 100 calibration records stored
- 20 hours of operation (NiMH batteries)
- Large LCD display screen
- Automatic backlighting at alarm
- Impact resistant over-mold body
- STEL and TWA readouts
- Intrinsically safe, CSA, C/US classified IECEx / ATEX approved (optional MSHA version available)
- 2 year warranty
- Personal monitoring
- Confined spaces
- Refineries/petrochemical
- Utilities
- Oil and Gas
- Water/wastewater
- Fire services
- Construction
| Gas Detected | Combustible Gases (Methane as standard) | Oxygen (O2) | Hydrogen Sulfide (H2S) | Carbon Monoxide (CO) |
|---|---|---|---|---|
| Detection Principle | Catalytic combustion | Galvanic cell | Electrochemical cell | |
| Detection Range (Increments) | 0 ~ 100% LEL (1% LEL) | 0 ~ 40.0% Vol. (0.1% Vol.) | 0 ~ 100.0 ppm (0.5 ppm) | 0 ~ 500 ppm (1 ppm) |
| Accuracy Statement | ± 5% of reading or ± 2% LEL (whichever is greater) | ± 0.5% O2 | ± 5% of reading or ± 2 ppm H2S (whichever is greater) | ± 5% of reading or ± 5 ppm CO (whichever is greater) |
| Sampling Method | Diffusion sampling standard / hand aspirator or motorized pump optional | |||
| Display | Digital LCD displays all four gases simultaneously, with auto backlight | |||
| Preset Alarms (User Adjustable) Overscale alarm (Non-adjustable) | 1st alarm 10% LEL | Low alarm 19.5% | 1st alarm 10 ppm | 1st alarm 25 ppm |
| 2nd alarm 50% LEL | High alarm 23.5% | 2nd alarm 30 ppm | 2nd alarm 50 ppm | |
| Over alarm 100% LEL | Over alarm 40.0% | TWA alarm 1.0 ppm | TWA alarm 25 ppm | |
| STEL alarm 5.0 ppm | STEL alarm 200 ppm | |||
| Over alarm 100 ppm | Over alarm 500 ppm | |||
| Types of Alarms | Gas Alarm: 2 Increasing alarms, STEL, TWA, overscale alarm. O2 decreasing/increasing. |
|||
| Trouble alarm: Sensor disconnection, low battery, circuit error, calibration range error | ||||
| Display of Alarm | Gas Alarm: Flashing LEDs, intermittent buzzer (95 db @ 30 cm), flashing gas value, vibration | |||
| Trouble alarm: Flashing LEDs, intermittent buzzer (95 db @ 30 cm), display of error message | ||||
| Operating Temp. & Humidity | -4°F to 122°F (-20°C ~ +50°C), 0 to 95% RH, non-condensing (splash resistant) | |||
| Response Time | Within 30 seconds (T90) | |||
| Continuous Operation | 20 hours after a 3 hour full charge (14 hours after 90 min charge) | |||
| Power Source | Direct charging NiMH batteries, set of 2 | |||
| Safety Design / Approvals | IECEx zone 0 Ex ia IIC T4; ATEX II 1G Ex ia IIC T4; (optional MSHA version also available) c CSA us classified, as intrinsically safe. Class I, Division 1, Groups A, B, C, D |
|||
| Dimension | 2.7” H x 3” W x 1” D (Approx. 70 H x 75 W x 25 D mm) | |||
| Weight | 4.6 ounces (approx. 130 g) | |||
| Case Material | High impact over molded rubber. Dust and water resistant with IP-67 approval. | |||
| Controls | Two buttons: POWER / MODE, AIR | |||
| Datalogging | Standard with all instruments. Stores 8 alarm trend sessions where readings are recorded 30 minutes before and after an alarm event. 3,600 data point capacity with a log time range of 10 to 300 hours (based on programmable interval times); and stores up to 100 calibration records. | |||
| Required Accessories | Battery charger | |||
| Standard Accessories | Alligator clip | 13-0116RK | ||
| NiMH batteries (set of 2) | 49-1609RK | |||
| Charging station with 115/220 VAC power supply (also available without power supply, 49-2170RK) | 49-2170RK-01 | |||
| Product CD (includes datalogging software) | 71-8002RK | |||
| Optional Accessories | Belt Clip | 13-0117RK | ||
| Padded carrying case for GX-2009 and accessories | 20-0112RK-01 | |||
| Charging station, 115/220 VAC powered for 2, 3, 4, or 5 instruments | 49-2170RK-XX | |||
| Charging station with 12 VDC power supply and vehicle adapter plug | 49-2171RK | |||
| 12 VDC adapter with vehicle plug (does not include charger base) | 49-2020RK | |||
| RP-2009 pump with 4” rubber nipple, 10’ hose and probe (up to 40’ hose available) | 81-1177RK | |||
| Hand aspirated sample draw with 10’ hose and probe (up to 40’ hose available) | 81-1160RK | |||
| USB to IrDA downloading cable | 47-5084RK-01 | |||
| SDM-2009 single calibration station | 81-SDM2009-01 | |||
| Configurations | 4 gas, LEL / O2 / H2S / CO |
|||
| 3 gas, LEL / O2 / H2S | ||||
| 3 gas, LEL / O2 / CO | ||||
| 2 gas, LEL / O2 | ||||
| 2 gas, O2 / H2S | ||||
| 2 gas, O2 / CO | ||||
| Single gas LEL, O2, CO, or H2S | ||||
| Warranty | Two years material and workmanship | |||
