Multi Gas Clip Simple Plus
Multi Gas Clip Simple Plus
Gas Detection Made Simple Plus
No charging ever! No calibration necessary! (Can be calibrated if required)
Reliably test for hydrogen sulfide (H2S), carbon monoxide (CO), oxygen (O2) and combustible gases (LEL) with this simple-to-use and simple-to-maintain detector. Just turn it on and have worry free assurance of protection against toxic gases 24/7 for three full years.
Low power usage is the key!
Gas Clip Technologies’ continued refinement of advanced low-power photometric infrared technology for combustible gas measurement helps make gas detection simpler and safer than ever. The newest member of their gas detector family, the Multi Gas Clip Simple Plus, features no charging ever and no calibrating necessary. It's SIMPLE to use!
No charging ever! No calibration necessary! (Can be calibrated if required)
Reliably test for hydrogen sulfide (H2S), carbon monoxide (CO), oxygen (O2) and combustible gases (LEL) with this simple-to-use and simple-to-maintain detector. Just turn it on and have worry free assurance of protection against toxic gases 24/7 for three full years.
Low power usage is the key!
Gas Clip Technologies’ continued refinement of advanced low-power photometric infrared technology for combustible gas measurement helps make gas detection simpler and safer than ever. The newest member of their gas detector family, the Multi Gas Clip Simple Plus, features no charging ever and no calibrating necessary. It's SIMPLE to use!
- 3 year run time - 3 year life!
- 3 year warranty. For any service, please call our service center.
- No charging ever! No calibration necessary!
- Large, easy to read screen
- Simple One Button Operation
- Works in oxygen enriched and oxygen deficient environments
- Continuous 1 second data logging
- LEL sensor is immune to H2S & silicone poison
- Assembled in USA
- Compatible with MGC Simple Dock or MGC Simple Wall Mount Dock
| Size | 4.75 H x 2.75 W x 1.25 D in. (120.65 x 69.85 x 31.75 mm.) | |
| Weight | 7.675 oz. (220.2 g) | |
| Temperature | -4˚F to +122˚F (-20˚C to +50˚C) | |
| Humidity | 5% to 95% RH (non-condensing) | |
| Battery Life | 1095 days continuous, based on an average of 1 minute/day of alarm condition | |
| Alarms | Visual, Vibrating, Audible (minimum 95dB) Low, High, STEL, TWA, OL (Over Limit) | |
| LEDs | 4 red alarm bar LEDs | |
| Yellow backlight (activated on button press) | ||
| Red backlight (activated on alarm condition) | ||
| Yellow Maintenance Notification LED | ||
| Display | Alphanumeric Liquid Crystal Display (LCD) | |
| Logs | 50 Bump Tests | |
| 50 Events | ||
| 50 Calibrations | ||
| Continuous 1-second data logging (> 2 months typical capacity) | ||
| Tests | Full function self-test upon activation | |
| Sensors, battery and circuitry continuous | ||
| Ingress Protection | IP 68 | |
| Warranty | Full 2 years | |
| Gases | H2S | 0 – 100.0 PPM (0.1 resolution), <2 ppm accuracy, <30s |
| CO | 0 – 500 PPM (1 resolution), <5 ppm accuracy, <30s | |
| Combustible | 0 – 100.0 %LEL (0.1 resolution), between 0.1% and 0.5% CH4 LEL accuracy, <30s | |
| O2 | 0 – 30.0 % vol. (0.1 resolution), <0.7% vol. accuracy, <15s | |
| Sensor Type | H2S, CO, O2 | Single plug-in electrochemical cell |
| Combustible | Soldered infrared (IR) | |
| User Options | User Message, Language, Low Alarm, High Alarm, STEL Alarm, TWA Alarm, TWA Method, TWA Interval, STEL Interval, SAFE, Maintenance Notification, Self-test Lock, Dock Lock, Sensor Enable/Disable, Calibration Interval, Bump Interval, Calibration Gas, %-by-volume, Latching Alarms, Life Display and Off Lock | |
| Approvals | CSA | Class I, Division 1, Group A, B, C, and D Class I, Zone 0, A/Ex ia IIC T4 Ga C22.2 No. 152-M1984 ANSI/ISA S12.13 |
| IECEx | CSA 16.0038 Ex ia IIC T4 Ga IEC 60079-0:2011 IEC 60079-11:2011 | |
| ATEX | SIRA 16ATEX2288 CE 0518 II 1 G Ex ia IIC T4 Ga (-20°C ≤ Ta ≤ +50°C) EN 60079-0:2012/A11:2013 EN 60079-11:2012 | |
