GCT External Pump
GCT External Pump
The GCT External Pump is a motorized sampling pump that allows Gas Clip diffusion detectors to extract air samples from up to 75 feet away. Its single-button operation and ability to easily attach to compatible detectors make the GCT External Pump simple to use. Additionally, the durable casing allows the pump to withstand the harshest environments.
- Compatible with all GCT multi gas and single gas diffusion detectors
- Draws samples at greater than 1 ft. per second (using 1/8” ID tubing)
- 45-hour continuous run time
- Recharges in 4-6 hours (typically)
- Audio & visual alerts
- Ergonomic design
- Lightweight
- Quiet motor
- 2-year warranty
| Size | 6.4” H x 2.6” W x 1.25” D | 163 x 68 x 31mm |
| Weight | 8 oz (235g) | |
| Temperature | -7.6˚ to +122˚F (-22˚ to +50˚C) | |
| Humidity | 5% to 100% RH (non-condensing) | |
| Battery Life | 40 continuous hours (typically) | |
| Charge Time | 4 - 6 hours (typically) | |
| Alarms | Visual & audible (minimum 95 dB) | |
| LED’s | Pump Flow LED | indicates that the pump is on and/or blocked |
| Power LED | indicates that the pump is on and the amount of battery life remaining | |
| Battery LED | indicates when the pump is charging and when it is fully charged | |
| Tests | Full-function self test upon activation | |
| Battery test runs continuously | ||
| Ratings | IP 68 | |
| Gas Inlet | 1/8 in. stainless steel barbed fitting | |
| Pump Draw | Sample from up to 75 ft. (23 m) | |
| Sample Delay Time | Less than 1 second per 1 ft. (0.3m) with 1/8 in. ID tubing | |
| Certifications and Approvals | CSA: | C22.2 No. 152; CSA21CA80033769X ANSI/ISA S12.13.01 Intrinsically Safe/Sécurité lntrinsèque Class I, Division 1, Group A, B, C, & D, T4 Class I, Zone 0, AEx ia IIC T4 Ga -20˚C < Ta < +50˚C; 4.2 Vdc |
| IECEx: | IECEx CSA 21.0006X Ex ia IIC T4 Ga IEC 60079-0:2017 IEC 60079-11:2011 -20˚C < Ta < +50˚C; 4.2 Vdc |
|
| ATEX: | CSANe 21ATEX2143X CE 2813 II 1 G Ex ia IIC T4 Ga EN 60079-0:2018 EN 60079-11:2012 -20˚C < Ta < +50˚C; 4.2Vdc |
