EC-600
EC-600
- Description
- Features
- Application
- Specifications
- Documentation
- Accessories
- Replacement Sensor
- Calibration Kit
RKI’s Model EC-600 is an indoor monitor that detects Carbon Monoxide (CO) with a range of 0-150 ppm. It’s a sleek low profile design which lends itself to laboratory or commercial applications. The EC-600 comes ready to operate with a simple wall mount bracket and 10 foot power cord. If Carbon Monoxide is present, the user is notified by an audible alarm tone and multicolored LED display.
The EC-600 uses a fast responding low-cost plug-in style electrochemical sensor. This long life sensor is field-replaceable with no special tools required.
The EC-600 uses a fast responding low-cost plug-in style electrochemical sensor. This long life sensor is field-replaceable with no special tools required.
- Compact, wall mounting design
- Highly visible 3 color LED digital display
- Power cable can enter from any direction
- Stores alarm summary data
- Built in audible and visual alarms
- 115 VAC operation
- Relay outputs for annunciation of alarms
- Low cost plugin electrochemical sensor
- Iron and steel industry
- Laboratories
- Boiler rooms
- Garages
- Vehicle service areas
- Engine testing
- Shipping / receiving docks
- Multi-occupancy residences
| Detection Principle | Electrochemical | |
| Gas Detected | Carbon monoxide (CO) | |
| Detection Range | 0 ~ 150 ppm (1ppm / digit) | |
| Display Resolution | 1 ppm | |
| Sampling Method | Diffusion or remote sampling method with optional sensor extender cable | |
| Indication Accuracy (under normal conditions) | + / - 5% of reading or + / - 2% full scale (whichever is greater) | |
| Response Time (under normal conditions) | 90% Response within 30 seconds (T90) | |
| Alarm Levels | Two preset alarms (L-H) | |
| Alarm 1 | 50 ppm | |
| Alarm 2 | 100 ppm (other settings available) | |
| Display of Alarm | 1st gas alarm | Gas concentration reading blinks, flashing AL 1 icon, orange back light, buzzer |
| 2nd gas alarm | Gas concentration reading blinks, flashing AL 2 icon, red back light, buzzer | |
| Alarm Logic | Latching or Non-latching (including trouble alarm) | |
| Alarm Contact | Dry contact, normally open or normally closed (default setting is normally open) | |
| Display | Digital LCD (3 digits, 7 segments / Green, Orange, Red) (For Alkaline battery version, the back light will be OFF during normal operation) | |
| Trouble Alarm / Self-Diagnosis | System trouble / sensor connection trouble | |
| Display of Trouble Alarm | Buzzer / flashing of red error message | |
| Relay Contact Rating | 125VAC, 1A or 30VDC, 1A (Resistive load) | |
| Approvals | CE marking standard. CSA approval optional (No power cord supplied with AC CSA version) | |
| Output Signal | 4 ~ 20mA (Non-isolated, Resistive load under 300Ω) or 0 - 1VDC (Non-isolated) | |
| *only for 0 - 1VDC Alkaline battery specification | ||
| Extender Cable (optional) | Extender cable with remote box (3 m, 5 m, 10 m, & 20 m lengths available) | |
| Power Sources | (120VAC±10%, 50/60Hz,) 24VDC±10%, or AA alkaline battery (2 each) | |
| Power Consumption | AC specification | MAX 3.5VA |
| DC specification | MAX 2W | |
| Continuous Operation | 1 year (no alarm, no indication for alkaline battery version) | |
| Operating Temperature | 0 ~ 104°F (-17 ~ 40°C) | |
| Operating Humidity | 0 - 90% RH (non-condensing) | |
| Mounting Equipment | Wall mounting type (by using accessory mounting plate or mount at one switch box) | |
| Cable inlet | Up, down and left/right, or rear side | |
| Dimension | Body | Approx. 3.15”(W) x 4.72”(H) x 1.2”(D) (80(W) x 120(H) x 35.5(D)mm) |
| Weight | AC specification | Approx. 7.05 oz (200g) |
| DC specification | Approx. 6.34 oz (180g) | |
| Alkaline battery specification | Approx. 8.11 oz (230g) | |
| Warranty | One year materials and workmanship | |
