RKI SDM-E2 calibration station for EAGLE 2
Call for Price
Description
Also includes AC adaptor, flash drive, USB cable, tubing & installation CD.
RKI SDM-E2 Calibration Station
The SDM-E2 is a versatile maintenance tool for the Eagle 2 portable gas monitor. This docking station can be used as a stand-alone device for charging, calibration and bump testing, with all records automatically stored for future upload to a PC via USB flash drive (PC software and flash drive included).
Multi Module System
The SDM-E2 can also be connected to a PC for automated calibration bump testing and archiving of datalog data from Eagle 2 instruments. Up to ten SDM-E2 docking stations can be connected simultaneously using USB cables. The SDM-E2 is also equipped with two gas ports to connect up to two calibration gas mixtures to the multi module system.
- Stand Alone Station
- Stand-alone station (no connection to PC Required)
- Charging (NiMH batteries)
- Calibration
- Bump Test
- Save bump test and calibration records
- Bump test and calibration records copy to USB jump drive
- 2 Calibration gas ports
- Includes PC software for viewing/archiving bump test and calibration records
-
Multi Module System
- Multiple modules connected to a PC (10 max)
- Charging
- Calibration
- Bump Test
- Configure Eagle 2 parameters
- 2 Calibration gas ports
- Archive Bump Test and Calibration records
- Archive data to network location
- Software controlled data retrieval
- Automatic calibration/bump test option
- Windows 7 compatible
| Input Power | 12 VDC |
| NOTE: AC Adapter with 100 - 240 VAC, 50/60 Hz, 0.6A input and 12 VDC, 1.2A output provided as standard. | |
| Environmental Conditions | • For Indoor Use Only |
| • -10° C to 40° C, below 80% Relative Humidity, Non-Condensing | |
| Applicable Instrument | EAGLE 2 |
| Memory Capacity | 64 KB |
| Maximum Record Size | 256 bytes |
| Maximum Number of Records Saved | 200 |
| Number of Calibration Gas Cylinders | Up to two calibration gas cylinders per bump test or calibration at a time |
| NOTE: If your EAGLE 2 contains more than one non-standard gas, more than two gas cylinders may be needed to complete a bump test or calibration. | |
| Standard Accessories | • AC Adapter |
| • USB Flash Drive | |
| • Single Module Data Viewer Software | |
| • SDM-E2 Docking Station PC Controller Software | |
| • Inlet Air Filter | |
| • Instruction Manual | |
| • 10 Foot Long Exhaust Tube | |
| • Two 3 Foot Long Tubes for GAS 1 and GAS 2 Fittings | |
| • 3 T-Fittings for PC Controlled Configuration | |
| • Check Valve for PC Controlled Configuration | |
| • USB Cable, Type A to Type B |
Additional information
| Weight | 1 lbs |
|---|
