Description
EVM-7 w/074-104 PID (ppb) Electrode (Grid) Pellet
The EVM Series Particulate Mass Concentration and Air Quality Monitors simultaneously measure particulates and gas concentration in real-time. The EVM-7 measures both particulates and air quality, and provides a lower cost of ownership by combining three instruments into one.
*Includes base model with PID (ppb) Sensor, CO2 Sensor, one Dummy Sensor (used to seal socket when no sensor is present), two 37mm Gravimetric Filter Cassettes (for pump protection; one in unit and one spare), 053-263 12V DC Universal Input Power Supply, 053-575 USB Cable, 100-456 Silicone Dielectric Grease for Impactors, 074-090 10 pack Pump Protection Filters, 074-720 Dust Zero Calibration Filter Assembly, 074-726 Toxic Calibration Adapter and 074-718 Storage Case.*
*Includes base model with PID (ppb) Sensor, CO2 Sensor, one Dummy Sensor (used to seal socket when no sensor is present), two 37mm Gravimetric Filter Cassettes (for pump protection; one in unit and one spare), 053-263 12V DC Universal Input Power Supply, 053-575 USB Cable, 100-456 Silicone Dielectric Grease for Impactors, 074-090 10 pack Pump Protection Filters, 074-720 Dust Zero Calibration Filter Assembly, 074-726 Toxic Calibration Adapter and 074-718 Storage Case.*
- Particulate, gas and photoionization detector (PID) measurement from a single device
- Less equipment to carry to job site; compact, user-friendly design
- 90-degree light scattering laser photometer measures particulates in real-time
- Proprietary technology for selecting particulate settings; no need for external cyclones
- Built in sampling pump allows for gravimetric analysis
- Large, easy-to-read display with trend graphing for measurements
- Time history data logging and compatibility with Detection Management Software makes analysis efficient
General | |
Display Languages | English, French, German, Italian, Portuguese, and Spanish |
User Interface | 10 pushbuttons and 4 softkeys, menu driven |
Display Type | Transreflective 128 x 64 LCD with backlighting |
Software Compatibility | TSI Quest Detection Management Software DMS |
Standards | CE Mark and RoHS compliant |
Particulate Impactors Size Fractions | PM2.5, PM4, PM10 or TSP (within the instrument’s measurement range) |
Flow Rate | 1.67 L/min |
Displayed Data | |
Measurements | Level, Minimum, Maximum, Average, Short-Term Exposure Level (STEL), Time Weighted Average (TWA) |
Real-Time Measurement | Once per second display update rate |
Time History Data Logging Intervals | Seconds: 1, 5, 15, 30 |
Minutes: 1, 5, 10, 15, 30, 60 | |
Trend Graphing Intervals for All Parameters | Minutes: 1.5, 3, 15 |
Hours: 1.5, 3, 8, 12, 24 | |
Status Indicators | Battery, Run, Stop, Overload and UnderRange |
Averaging Time | 1 to 30 seconds |
Physical Characteristics | |
Size | 7.5” x 7.5” x 2.75” (19 cm x 19 cm x 7 cm) |
Weight | 2.9 lb (1.3 kg) |
Housing | Static dissipative ABS Polycarbonate housing |
Tripod Mount | Standard photographic mount on bottom, 1/4” - 20 screw heads |
Operating Conditions | |
Temperature Range | 32 °F - 122 °F (0 °C to 50 °C) |
Pressure Range | 65 kPa to 108 kPa |
Relative Humidity Range | 10% to 90% non-condensing |
Storage Conditions | |
Temperature | -4 °F to 140 °F (-20 °C to 60 °C) |
Humidity | 0% to 95% RH, non-condensing |
Electrical Characteristics | |
Intelligent Sensors | Auto-detectable when inserted at power-off mode |
Battery Pack | Rechargeable lithium-ion |
Battery Life | Minimum of 8 hours under continuous operation |
External DC Power Input | 10 to 16 Volt power inlet (nominal 12V DC) 1.5A |
Power Adapter | Universal AC adapter 100 to 240 Volt AC, 50-60 Hz |
Method | Base Units | Display Resolution | Display Range | Accuracy Repeatability |
---|---|---|---|---|
VOC: 10.6eV Photoionization Detector | ||||
Low Sensitivity PID | select ppb or mg /m3 | 0.01 | 0.00 - 2,000 | +/-5% / 2%*** at calibration level |
High Sensitivity PID | select ppb or μg /m3 | 1 | 0 - 50,000 | +/-5% / 2%*** at calibration level |
CO2 | ||||
NDIR (Non-Dispersive Infrared) | ppm | 1 | 0 - 5,000 ppm; autoranging (Noncondensing) | +/-100 ppm @ 20 deg C, 1 bar pressure at 2,000 ppm applied gas |
Temperature | ||||
Junction Diode | deg C | 0.1 | 0.0 - 60.0 | +/- 1.1 deg C |
deg F | 0.1 | 32.0 - 140 | +/- 2 deg F | |
Relative Humidity | ||||
Capacitive | % humidity | 0.1 | 0.0 - 100 | +/-5% RH* of signal between 10%-90% |
Air Velocity | ||||
Omni-directional Heated Thermistor Windprobe | meter/sec | 0.1 | 0.0 - 20 | +/-0.12 m/s + 4.5% of signal |
feet/min | 1 | 0 - 3940 | +/-23.6 ft/min + 4.5% of signal | |
Particulates | ||||
90° Light Scattering / Integrating Photometer | mg / m3 | 0.001 | 0.000 - 200.0 | +/-15% (rel ARD*) |
μg / m3 | 1 | 0 - 20,000 | +/-15% (rel ARD*) | |
Particulates Size Range | μm | N/A | 0.1 - 10 | ** |
Electrochemical Sensor | ||||
CO - Carbon Monoxide Sensor | ppm | 1 | 0 - 1,000 | +/-5% / 2% of signal |
Cl2 - Chlorine Sensor | ppm | 0.1 | 0.0 - 20 | +/-5% / 2% of signal |
EtO - Ethylene Oxide Sensor | ppm | 0.1 | 0.0 - 20 | +/-5% / 2% of signal |
HCN - Hydrogen Cyanide Sensor | ppm | 0.1 | 0.0 - 50 | +/-5% / 2% of signal |
H2S - Hydrogen Sulfide Sensor | ppm | 1 | 0.0 - 500 | +/-5% / 2% of signal |
NO - Nitric Oxide Sensor | ppm | 0.1 | 0.0 - 100 | +/-5% / 2% of signal |
NO2 - Nitrogen Dioxide Sensor | ppm | 0.1 | 0.0 - 50 | +/-5% / 2% of signal |
O2 - Oxygen Sensor | % | 0.1 | 0.0 - 30 | +/-5% / 2% of signal |
SO2 - Sulfur Dioxide Sensor | ppm | 0.1 | 0.0 - 50 | +/-5% / 2% of signal |
EVM-3 | EVM-4 | EVM-7 | |
---|---|---|---|
EVM Monitor Types | Particulate Monitor (no indoor air quality monitor) | Indoor Air Quality Monitor (no particulates) | Indoor Air Quality/Particulate Monitor (eliminates the need for separate meters) |
Temperature | + | + | + |
Relative Humidity | + | + | + |
Air Velocity (With Purchase of Optional Accessory) | + | + | + |
Particulates (Mass Concentration) | + | + | |
Toxic Gas (Choose from 9 Sensors) | + | + | |
Carbon Dioxide | + | + | |
Select Volatile Organic Compounds | + |