Sensor, Arsine (AsH3) sensor, 0-1.5 ppm, direct connection, non explosion proof with j-box (no transmitter)
$700.00
Description
65-2301RK Direct Connect Sensor
The RKI Direct Connect series gas sensors are highly reliable and very cost effective for the detection of common gas hazards. The direct connect series are available for LEL, H2 Specific LEL, LEL IR, Oxygen, H2S, CO, CO2, and for a variety of toxic gases. The sensors for LEL, H2, Oxygen, H2S, CO2, and Carbon Monoxide are explosion-proof with flame arrestors, and approved for use in hazardous areas (Class 1, Div. 1 Groups B, C, D). An optional non-explosion proof version is available for oxygen, H2S, CO, and CO2 for use in Class 1 Div 2.
The Direct Connect sensors can be used in two different ways. The sensors can be mounted directly to the controllers as a complete stand alone system, or they can be mounted to explosion proof junction boxes for remote detection.
The toxic sensors are electrochemical type plug-in sensors, which provide high specificity, fast response, and long life. The plug-in design allows quick replacement in the field with no tools required. Toxic sensors are designed for use in Class I, Div. 2 hazardous locations. Sensors are available for NH3, AsH3, Cl2, ClO2, HCN, PH3, and SO2.
The Direct Connect sensors can be used either indoors or outdoors. The flame arrestors for the explosion-proof versions utilize a patented coating which make them water repellent. Also, splash guards are available for use in very wet environments. An optional stainless steel junction box is available for corrosive environments.
All of the Direct Connect sensors are designed to specifically interface with RKI Beacon 110, 200, and 410A controllers.
The Direct Connect sensors can be used in two different ways. The sensors can be mounted directly to the controllers as a complete stand alone system, or they can be mounted to explosion proof junction boxes for remote detection.
The toxic sensors are electrochemical type plug-in sensors, which provide high specificity, fast response, and long life. The plug-in design allows quick replacement in the field with no tools required. Toxic sensors are designed for use in Class I, Div. 2 hazardous locations. Sensors are available for NH3, AsH3, Cl2, ClO2, HCN, PH3, and SO2.
The Direct Connect sensors can be used either indoors or outdoors. The flame arrestors for the explosion-proof versions utilize a patented coating which make them water repellent. Also, splash guards are available for use in very wet environments. An optional stainless steel junction box is available for corrosive environments.
All of the Direct Connect sensors are designed to specifically interface with RKI Beacon 110, 200, and 410A controllers.
- Available gases include
- LEL, H2S, CO, & CO2
- Toxic sensors include NH3, AsH3, Cl2, ClO2, HCN, & SO2
- Infrared sensors for combustibles and CO2
- Patented water repellent sensor coating
- Explosion proof construction
- Optional stainless steel junction box
- Petrochemical plants
- Refineries
- Gas plants
- Offshore drilling platforms
- Water & wastewater treatment plants
- Pulp & paper mills
- Gas, telephone, & electric utilities
- Parking garages
- Manufacturing facilities
- Steel
- Automotive
Toxic Gas Transmitters Class I, Div. 2
| O2 (Oxygen) | H2S (Hydrogen Sulfide) | CO (Carbon Monoxide) | Toxics | CO2 (Carbon Dioxide) | |
|---|---|---|---|---|---|
| Sensor With J-Box | 65-2497RK | 65-2498RK | 65-2499RK | See Chart Below | 61-1007RK-02 |
| 65-2502RK | 61-1007RK-03 | ||||
| 61-1007RK-05 | |||||
| 61-1007RK-10 | |||||
| Sensors | Galvanic cell | Electrochemical | Infrared | ||
| Sensor Only | 65-2494RK | 65-2495RK | 65-2496RK | See Chart Below | 61-0198RK-02 |
| 65-2510RK | 61-0198RK-03 | ||||
| 61-0198RK-05 | |||||
| 61-0198RK-10 | |||||
| Measuring Range | 0-25% Vol. | 0-100 ppm | 0-300 ppm | See Chart Below | -02: 0 - 5000 ppm |
| -03: 0 - 5.0% Vol. | |||||
| -05: 0 - 50% Vol. | |||||
| -10: 0 - 100% Vol. | |||||
| Lower Detectable Limit (LDL) | 0.1% Vol. | 2% of full scale | |||
| Response Time (T-90) | 20 seconds or less | 35 seconds or less | 60 seconds or less | 30 seconds or less | |
| Accuracy | +/- 5% of full scale (0.5% volume for oxygen) | ||||
| Life Expectancy | 2 years with normal service | 2 to 3 years with normal service | 5 years plus with normal service | ||
| Operating Environment | |||||
| Location | Indoor or outdoor, Class I, Div. 2 | ||||
| Temperature | -4°F to 122°F | 14°F to 104°F | -40°F to 122°F | ||
| -20°C to 50°C | -10°C to 40°C | -40°C to 50°C | |||
| Humidity | 0 - 99% RH non condensing | ||||
| Housing | |||||
| Housing J-Box | Cast aluminum, explosion-proof | ||||
| Sensor | Aluminum | ||||
| Controllers | Compatible with the following controllers: Beacon 110, Beacon 200, and Beacon 410A | ||||
| Warranty | One year materials and workmanship | ||||
| Toxic Direct Connect Sensor Ordering Information | |||||
|---|---|---|---|---|---|
| Part Number With J-Box | Part Number Without J-box | Gas | Range | Resolution | Sensor type |
| 65-2301RK-NH3 | 65-2300RK-NH3 | Ammonia (NH3) | 0 - 75.0 ppm | 0.1 ppm | ESM-01 |
| 65-2303-NH3-75 | 65-2302-NH3-75 | Ammonia (NH3) | 0 - 75.0 ppm | 0.1 ppm | CT-7 |
| 65-2303-NH3-1 | 65-2302-NH3-1 | Ammonia (NH3) | 0 - 100 ppm | 1 ppm | CT-7 |
| 65-2303-NH3-2 | 65-2302-NH3-2 | Ammonia (NH3) | 0 - 200 ppm | 1 ppm | CT-7 |
| 65-2303-NH3-5 | 65-2302-NH3-5 | Ammonia (NH3) | 0 - 500 ppm | 1 ppm | CT-7 |
| 65-2301RK-AsH3 | 65-2300RK-AsH3 | Arsine (AsH3) | 0 - 1.50 ppm | 0.01 ppm | ESM-01 |
| 65-2303-CL2-3 | 65-2302-CL2-3 | Chlorine (Cl2) | 0 - 3.00 ppm | 0.01 ppm | CT-7 |
| 65-2303-CL2-10 | 65-2302-CL2-10 | Chlorine (Cl2) | 0 - 10.0 ppm | 0.1 ppm | CT-7 |
| 65-2303-CLO2-1 | 65-2302-CLO2-1 | Chlorine Dioxide (ClO2) | 0 - 1.00 ppm | 0.01 ppm | CT-7 |
| 65-2303-CLO2-3 | 65-2302-CLO2-3 | Chlorine Dioxide (ClO2) | 0 - 3.00 ppm | 0.01 ppm | CT-7 |
| 65-2303-CLO2-5 | 65-2302-CLO2-5 | Chlorine Dioxide (ClO2) | 0 - 5.00 ppm | 0.01 ppm | CT-7 |
| 65-2301RK-HCN | 65-2300RK-HCN | Hydrogen Cyanide (HCN) | 0 - 15.0 ppm | 0.1 ppm | ESM-01 |
| 65-2301RK-PH3 | 65-2300RK-PH3 | Phosphine (PH3) | 0 - 1.00 ppm | 0.01 ppm | ESM-01 |
| 65-2301RK-SO2 | 65-2300RK-SO2 | Sulfur Dioxide (SO2) | 0 - 6.00 ppm | 0.01 ppm | ESM-01 |
Additional information
| Weight | 1 lbs |
|---|
