Description

Sensepoint with Junction Box, 0-20 ppm Hydrogen Sulfide

The Sensepoint range of flammable, toxic and oxygen gas detectors offer users a low cost solution to their gas monitoring needs, indoors or out and even in potentially explosive atmospheres (ATEX approval only). Supplied with a pre-wired junction box, the detector can be installed using conduit or armored cable and glands depending on individual site standards. The junction box includes a hinged lid to ensure both hands are free to complete electrical connections. Threaded M20 as well as 3/4" and 1/2” NPT clearance entries are included as standard, each one fitted with an appropriate seal, so enabling the user to select the most convenient entry size to use.

Fit For Purpose

• Flammable, toxic and Oxygen versions available

• High performance, low cost

• Suitable for new and retrofit applications

Proven Sensor Technology

• Surecell electrochemical sensors

• Poison resistant catalytic bead

• Fast and reliable

• Typical 2 to 5 years operational life

ATEX Certified

• Complies with the latest European standards

• Hazardous area approval and performance

• IP65 / 66 for use in harsh environments

• Factory set operation

• Simple to replace

• Minimal training required

Range of Accessories

• Weatherproof cap

• Flow adaptor

• Duct mounting kit

• Collecting cone

General specification
Use	Cost-effective, fixed point gas detector for the protection of personnel and plant from flammable, toxic and Oxygen gas hazards
Detectable gases
Gas		Measuring range			Operating temperature
Identifier	Name	1	2	3	Min	Max
F	Flammable	0-100% LEL			-40°C / -40°F	50°C / 122°F
O	Oxygen	0-25% VOL			-15°C / 5°F	40°C / 104°F
C	Carbon Monoxide	0-200 ppm	0-500 ppm		-20°C / -4°F	50°C / 122°F
H	Hydrogen Sulfide	0-50 ppm	0-20 ppm	0-100 ppm	-25°C / -13°F	50°C / 122°F
G	Hydrogen	0-1000 ppm			-5°C / 23°F	40°C / 104°F
L	Chlorine	0-5 ppm	0-15 ppm		-20°C / -4°F	50°C / 122°F
S	Sulfur Dioxide	0-15 ppm	0-50 ppm		-15°C / 5°F	40°C / 104°F
N	Nitrogen Dioxide	0-10 ppm			-15°C / 5°F	40°C / 104°F
A	Ammonia	0-50 ppm	0-1000 ppm		-20°C / -4°F	40°C / 104°F
Construction
Electrical	Flammable (0-100% LEL)	Toxic & Oxygen	Junction Box
	3 wire mV bridge	2 wire loop powered 4-20mA (plus screen)	Earth continuity plate
	2.9-3.5V, 0.7W	16-30 Vdc, 0.9W	BK4 terminal block (4 way
	200mA constant current		4 x 0.5mm2 (20AWG) to 2.5mm2 (14AWG)
			1 x M20, 1 x ¾” NPT, 1 x ½” NPT
Material	Polyphenylene Sulfide (PPS)	Polyphenylene Sulfide (PPS)	Fire retardant GFP
Weight	190g	185g (205g Oxygen)	600g
Certification	Ex II 2GD	Ex II 2 GD Ex d ia IIC T4 Gb Tamb -40ºC to +65ºC	Ex II 2GD
	Ex d IIC T6 Gb	Ex tb IIIC A21 IP67 T135ºC Db	Ex e IIC T6 Gb Tamb -40ºC to +50ºC
	Ex tb IIIC A21 Db IP67 T85ºC	Baseefa08ATEX0263X	Ex t IIIC T85ºC Db IP66
	(Tamb -40ºC to +55ºC) or T100ºC	IECEx BAS08.0070X	Sira 06ATEX3185
	(Tamb -40ºC to +70ºC) or T135ºC
	(Tamb -40ºC to +80ºC)
	Baseefa08ATEX0265X
	IECEx BAS08.0068X
Applicable standards	This product complies with the relevant CE standards including: EMC to EN50270, Flammable to EN60079-29-1, Toxic to EN445544 (H2S only)
Environmental
IP rating	IP65 standard, IP66 with weather protection in accordance with EN60529:1992
Operating temperature	Dependent upon gas type and certification
Operating humidity range	Continuous:	20-90% RH (non condensing)
Operating humidity range	Intermittent:	10-99% RH (non condensing)
Operating pressure	90-110kPa
Storage conditions	Instrument -40°C to +50°C (-40°F to +122°F)
Ordering Information
Standard Supply	Each detector is supplied complete with junction box, multiple cable entries, earth continuity plate, hinged lid and instruction leaflet, all sealed in a plastic bag inside a shipping carton
Shipping Details	Shipping carton dimensions:	Length:	6.3 in. (160 mm)
		Width:	8.5 in. (215 mm)
		Depth:	3.1 in. (80 mm)
Optional Accessories	02000-A-1645	Calibration gas flow housing (for flammable & toxic)
	00780-A-0160	Right angle mounting bracket for ceiling mounting
	02000-A-1640	Weather Housing for use with flammable detector including remote gassing nozzle
	02000-A-1635	Weather Housing for use with toxic/Oxygen detector including remote gassing nozzle
	02000-A-1642	Collecting cone for use with flammable detector
Calibration Equipment	Contact Honeywell Analytics Representative

Gas & Range	Flammable 0-100% LEL	Flammable PPM (Typically 0-10% LEL)	Hydrogen Sulfide (H2S) 20/50/100 ppm	Carbon Monoxide (CO) 100/200/500 ppm	Ammonia (NH3) 50/1000 ppm	Chlorine (Cl2) 5/15 ppm	Oxygen (O2) 25% V / V	Hydrogen (H2) 1000/10000 ppm	Sulfur Dioxide (SO2) 15/50ppm	Nitric Oxide (NO) 100ppm	Nitrogen Dioxide (NO2) 10ppm
Operating Temp	-40 to +80˚C	-30 to +65˚C	-25 to +50˚C	-20 to +50˚C	-20 to +40˚C	-20 to +50˚C	-15 to +40˚C	-15 to +40˚C	-15 to +40˚C	-15 to +40˚C	-15 to +40˚C
Operating Humidity	Continuous:	20 to 90% RH (non-condensing)
Operating Humidity	Intermittent:	10 to 99% RH (non-condensing)
Storage Conditions	0 to 25˚C; 30 to 70% RH	0 to 25˚C; 30 to 70% RH	0 to 25˚C; 30 to 70% RH	0 to 25˚C; 30 to 70% RH	0 to 25˚C; 30 to 70% RH	0 to 25˚C; 30 to 70% RH	0 to 25˚C; 30 to 70% RH	0 to 25˚C; 30 to 70% RH	0 to 25˚C; 30 to 70% RH	0 to 25˚C; 30 to 70% RH	0 to 25˚C; 30 to 70% RH
Operating Pressure	90 to 110kPa	90 to 110kPa	90 to 110kPa	90 to 110kPa	90 to 110kPa	90 to 110kPa	90 to 110kPa	90 to 110kPa	90 to 110kPa	90 to 110kPa	90 to 110kPa
Warm-up Time	< 10 minutes	< 20 minutes	< 3 minutes	< 3 minutes	< 3 minutes	< 5 minutes	< 5 minutes	< 3 minutes	< 3 minutes	12 hours	1 hour
Response Time
T20	–	–	< 6 secs	< 5 secs	–	< 10 secs	< 3 secs	–	–	< 3 secs	< 15 secs
T50	< 5 secs	< 5 secs	< 15 secs	< 12 secs	< 10 secs	< 20 secs	< 5 secs	< 10 secs	< 10 secs	< 5 secs	< 30 secs
T90	< 10 secs	< 10 secs	< 40 secs	< 30 secs	< 65 secs	< 105 secs	< 10 secs	< 45 secs	< 90 secs	< 30 secs	< 60 secs
Supply	200mA; 0.7W maximum		18 to 30VDC; 0.9W maximum
Signal Output	mV bridge		Loop powered 4-20mA
Linearity	< 5% fsd or ±10% of reading		< 5% fsd
Operating Life	5 years (typical)		2 years (typical)		18 months (typical)		1 year (typical)	18 months (typical)
Storage Life	Typically, over 5 years when in original sealed packaging		6 months	6 months	6 months	6 months	6 months	6 months	6 months	6 months	6 months
Stability (zero)
with time	< ±3% fsd / yr		< ±2% fsd / yr	< ±2% fsd / yr	< ±2% fsd / yr	< ±2% fsd / yr	< ±2% fsd / yr	< ±2% fsd / yr	< ±2% fsd / yr	< ±2% fsd / yr	< ±2% fsd / yr
with temperature	< ±1% fsd2	< ±3% fsd	< ±5% fsd		< ±6% fsd	< ±2% fsd		< ±2% fsd	< ±5% fsd	< ±5% fsd	< ±5% fsd
with humidity	< ±1% fsd		< ±10% fsd	< ±2% fsd	< ±10% fsd	< ±2% fsd		< ±2% fsd	< ±10% fsd	< ±10% fsd	< ±10% fsd
Stability (span)
with time	< ±3% fsd / yr		< ±2% fsd / yr	< ±4% fsd / yr	< ±20% fsd / yr	< 10% fsd / yr	< ±20% fsd / yr	< ±2% fsd / yr
with temperature	< ±3% fsd	< ±8% fsd	< ±25% fsd	< ±20% fsd	< ±20% fsd	< 40% fsd	< ±10% fsd	< ±60% fsd	< ±15% fsd	< ±25% fsd
with humidity	< ±2% fsd		< ±10% fsd	< ±2% fsd	< ±10% fsd	< ±2% fsd	< ±1% fsd	< ±2% fsd	< ±10% fsd
Weight	190g	190g	185g	185g	185g	185g	205g	185g	185g	185g	185g
Construc. Materials	Polyphenylene Sulfide (PPS)
I.P. (NEMA) Rating	IP65 (standard), IP67 (with weather protection fitted)
Certification Details (ATEX/ IECEx)	Ex II 2 GD Ex d IIC Gb T85ºC Tamb -40ºC to +55ºC		Ex II 2 GD Ex d ia IIC T4 Gb Tamb -40ºC to +65ºC
	Ex II 2 GD Ex d IIC Gb T100ºC Tamb -40ºC to +70ºC		Ex tb IIIC A21 IP67 T135ºC Db
	Ex II 2 GD Ex d IIC Gb T135ºC Tamb -40ºC to +80ºC		Baseefa08ATEX0263X
	Ex tb IIIC A21 Db IP67		IECEx BAS08.0070X
	Baseefa08ATEX0265X
	IECEx BAS08.0068X
Other Certifications	Russian:	GOST
Applicable Standards	This product complies with the relevant CE standards including: EMC to EN50270, Flammable sensor to EN60079-29-1

Sensepoint Datasheet

Sensepoint Quick Start Guide

Sensepoint Technical Manual

Sensepoint Spare Sensor, 0-20 ppm Hydrogen Sulfide

$712.00

Add to cart
Compare

Additional information

Weight	1.76 lbs
Dimensions	6.3 × 8.5 × 3.1 in

Sensepoint with Junction Box, 0-20 ppm Hydrogen Sulfide

Description